South Bend stage 3 Endurance clutch kit with flywheel for 02A & 02J transmissions. This will hold the most torque while retaining street like driving characteristics. Any higher holding kit will have a puck style disc. South Bend modifies this with a performance pressure plate paired with a full-face Feramic lining on both sides of the clutch disc. The Feramic lining takes about 5,000 miles to fully bed in and is designed for strength and longevity. Designed to reduce noisy clatter, especially at idle, and virtually eliminate rattle when the clutch is not engaged. Only compatible with single mass flywheels (choose your option above).
South Bend Clutch, Inc. has very specific warranty requirements. We strongly recommend reading their policy in its entirety prior to purchase. Please see the note and link below.
425 lb/ft of Torque at the Crank
Dual-Spring VR6 Clutch Disc
6x Pressure Plate Bolts
Flywheel Bolts *Quantity and type based on chosen flywheel (Optional)
Fits the Following:
2000-2006 Audi TT FWD
1990-1995 VW Corrado
1992-1996 VW Eurovan
1997-2006 VW Golf TDI
1999.5-2006 VW Golf 1.8T 5-Speed
1995-2002 VW GTI VR6 5-Speed
1997-2005 VW Jetta TDI (not late 2005.5)
1999.5-2005 VW Jetta 1.8T 5-Speed
1994-2002 VW Jetta VR6 5-Speed
1998-2006 VW New Beetle TDI, 1.8T 5-Speed
1990-1997 VW Passat
1992-1993 VW Transporter
Warranty Details: This product comes with a 12-month, 12,000 mile warranty against defects. This warranty is void unless certain criteria are met, including that the kit be purchased at or above their Minimum Advertised Price (MAP) and that it be installed with a new or resurfaced flywheel. The product must be registered with the manufacturer within 30 days of purchase. A warranty card should be enclosed with the product, or an online warranty registration can be found here. For the full warranty policy of South Bend Clutch, Inc., please follow this link.